Problems needed to be solved before the use of automatic door in our daily life, we can see traces of automatic doors, hotels, office buildings, shopping malls, etc. most of the buildings are the automatic door, but Shanghai automatic door Xiaobian learned in the process of using automatic door I will meet a lot of problems, to ensure the normal use of the automatic door, we must solve the following problems.
To solve these problems: operation fault is difficult to repair, but in need of repair, required cost is high; the purchase of automatic door the best choice by the professional manufacturers of brand, possible it is best to learn more about the data of the manufacturer; at the time of purchase best in vendor specific distribution points or a spot in the store to buy and at the time of purchase to clear the purchase of equipment basic configuration to prevent sellers deduction of components should before use.
Translation door is the highest use rate of automatic door varieties, various forms of access can be used, but the whole system must be specially produced, the installation environment has certain requirements and restrictions. Flat open automatic door and our daily use of the door are the same, and can be installed in the existing manual door based on, do not need to make more changes can be the door retrofit, especially on the top mounted with easy construction, specialty, therefore, regardless of new construction or renovation projects can facilitate the use of the product. Pure glass door production cost is low, the permeability is good; the glass door of the production cost is high, it is stable, the atmosphere, safe and reliable. So, when the door hole is small, usually by pure glass door, when the door hole is larger, usually by a frame glass door, but the larger the wind entrance, the best or the door frames.
But note that automatic door is not necessarily a glass door, in fact, automatic door can see in my daily life in a variety of door body made, only in our country currently automatic door application is not very wide, mainly used in the building of the import and export, the import and export basically also is used as a glass door body. Generally speaking, the configuration of automatic door sensors are mounted general lintel, but if your automatic door installation on the ceiling above, with the installation of a ceiling type sensor will appear to be flawless.
Automatic door is not fashionable and beautiful generous, but also with a variety of functions, such as dust and anti dry tone, by the vast number of consumers love. Everyone in the use of automatic door must be solved before the above small series of problems, to clarify the use of automatic door safety precautions, to avoid the use of automatic doors in the future when some unnecessary trouble.
