Material and maintenance of electric door attention matters electric door in our daily life plays an important role, its safety, fashion, convenient advantages by the consumer favorite, in order to allow consumers to more in-depth understanding of the electric door, Shanghai automatic door Xiaobian for everyone summarizes the next electric door material and maintenance matters needing attention, below we together to find out.
Material of electric door
Electric door main material is generally made of stainless steel or aluminum, 2001 years ago, stainless steel material door was named after the standard door, but in 2001 after the aluminum alloy material replaced by. The reason is that the stainless steel is not easy to shape. Electric door functions and features
1, in the use and control, there are manual and automatic control system to meet the user's requirements for the opening and closing of the industrial door.
2, safe and reliable type, when the door is closed a door body anti blocking, gas sense of security features rebound margin, or infrared sensing function, when encountered resistance or obstruction, the door automatic door control system will rebound, so the card, truck accident.
3, in the convenience, even if is to manually open and close the sliding door is very easy, because 90% of the weight of the door has been or by the hammer spring balance. These springs is based on each door body by scientific calculation separately prepared.
Electric door maintenance matters needing attention
1, the performance of the electric door alarm function depends on the performance of the alarm probe users should be based on the actual need to select the alarm probe. DKM-2B controller complete sets of factory with a heat release alarm probe. If no alarm probe can not Jie.
2. The type of the output signal interface of the electric door alarm probe should be the output voltage of the relay output interface should be the direct current 12-15V which can not be directly supplied by the controller. Probe power consumption should be 100 ma. According to the site can be used for more than one probe (generally 1 - 2 is appropriate) much the way and take probe. Probe. Should avoid other heat or direct light effects above should add fangyuzhao.
3, electric door automatic shutdown function can be set according to the user's door body travel time is about 145 seconds.
Use of electric door (retractable door)
4, electric door opening and closing the opposite direction when the terminal controller can be reversed. The same STOP display direction and the actual contrary when the same method to adjust the wiring.
By professional technicians to repair or contact with supplier and manufacturer maintenance 5, the controller failure. In order to avoid the impact of the expansion of the use.
6, electric door controller should be kept clean to prevent water or other harmful substances erosion. Use of organic solvents is prohibited.
7, the electric door of the cable core number should not be less than 8 lines (in the past 7 lines of wiring is not very reasonable) in the middle of the door should not contain connectors.
8, the remote control transmitter should keep the shell to prevent squeezing vibration and falling into the water and other phenomena. Pay attention to check the battery voltage when necessary to replace in time. The battery should be replaced when the remote control is too close. The battery model is KC12V-23A. Remote control should try to avoid electromagnetic interference source.
9, the remote control can not be used to exchange the use of encrypted code. Users need to change the password can be changed by the manufacturer as required.
